KOYU Production / M60-A SEQ2 Production / RW LP Keycaps / U80-A1

#1
KOYU Production Updates

L1000606.jpg
All Aluminium variants of the KOYU have been completed and are now going through final inspection and packaging.

L1000640.jpg L1000648.jpg
KOYU TANK EDITIONS


Raw brass is very susceptible to scratches and resulted in a high-scratch rate during the PVD plating. It’s a challenging process when dealing with a mirror-finish as it’s unforgiving, making the surface untouchable while mounting the fixtures. All units which do not pass are then re-finished and then sent for re-plating, we’re doing this at a rate of several a day and should be complete this week. See below the beautiful mirror-polished, raw brass KOYU.

L1000627.jpg L1000629.jpg
Here is how the KOYU TANK looks after being PVD plated. It is inconceivably heavy, I hope all that were lucky enough to secure one make some stability upgrades to their desks!

L1000609.jpg L1000617.jpg
TANK upgrades!
We’ve added an oil coating to the base of the TANK editions. Bead-blasted PVD is incredibly absorbent to any oils, making it a fingerprint magnet. We’ve added an oil finish to the brass base to make it less-porous and not attract fingerprints which results in a much cleaner finish. It also made the colour darker than normal which matches more nicely with the top enclosure.


L1000753.jpg
Extras


We will have extras of the KOYU available around JULY. This will include TANK editions. Time/Date for the extras will be posted to our social media and mailing list: https://rama.link/mail

M60-A Production updates

L1000550.jpg
The M60-A SEQ2’s are well into the machining process, there are a significant number of units to go through with many machining operations. This is the longest process in the production chain.

L1000563.jpg
RW LP Keycaps


We’ve begun production on the mould for our new Low-Profile keycaps. We’ve made these available in 9 different colour options and in a set of 60x1U + 2x2U so that they can be used on various ortholinear boards. They will be moulded from Polycarbonate for its exceptional optical clarity when creating our ICED variation of the cap (PC allows up to 90% of light transmission). The keycap has a polished finish on the outer surfaces for a retro look/feel, and the inside of the cap has a frosted finish to help disperse light when used with LEDs and the ICED cap. The first tool samples should be ready by Mid-June. You can pre-order them now at: https://rama.link/rwlp

RW-M6-C-PRESS-01.1733.jpg RAMA-LP-GRID-CAP-SET-B.1620.jpg
U80-A


The U80-A will be launching before the end of May. We have already started prototyping and commenced production on parts of the assembly. Our custom fasteners & spacers for the countersunk screws in the plate and MUTE mount have been produced in mass and received in our warehouse. The custom feet have also been produced in mass. The MUTE mount and U80-A enclosure prototype are in production and should be received in JUNE. The prototype PCB’s have also arrived and are being evaluated.

L1010470.jpg
 

Top